high-pressure process

英 [haɪ ˈpreʃə(r) ˈprəʊses] 美 [haɪ ˈpreʃər ˈprɑːses]

网络  高压法

化学



双语例句

  1. Analysis of the combined Production Melamine Plant and By High-pressure process Urea Plant by CO_2 Stripping Proeess
    高压法三聚氰胺装置与二氧化碳汽提法尿素装置联产利弊浅析
  2. With built-in type, single seal face and single spring, U-ring is used for rotating ring auxiliary seal, high reliable seal, fitting for high-pressure petrochemical process pump.
    内装式、单端面、单弹簧、平衡型,动环辅助密封采用U形密封圈,密封可靠,适合高压石油化工流程泵。
  3. Several shaft-breaking incidents occurred during the running of booster pump for molten urea in a melamine plant of high-pressure process has caused many unscheduled plant shut-downs.
    高压法三聚氰胺装置熔融尿素升压泵运行过程发生多起断轴事故,使装置多次出现非计划停工。
  4. A ultra high-pressure extraction ( UHPE) process for glycyrrhizic acid was studied.
    研究了甘草酸的超高压提取工艺。
  5. The thesis introduces the flow process of traditional technology of "T" type high-pressure blade and the reasons which effect the process period.
    分析介绍了“T”型叶根高压动叶传统工艺方法的流程及影响生产加工周期的原因。
  6. Comparison of technical schemes about high-pressure and low-pressure demethanizer process in ethylene plant
    高低压脱甲烷流程方案的比较
  7. Regulating High-Pressure Waste Pump and its Process Based on Principle of Most Economic Water Transportation
    以最经济输水为原则调整高压输水泵及工艺
  8. Experiment on precipitation amount and mechanism of asphaltene in high-pressure gas injection process
    高压注气过程中沥青质沉淀机理及规律的实验研究
  9. The Application of High-pressure Air-free Coating Spraying Process in Large-scale Oil Tank
    高压无气喷涂工艺在大型储罐上的应用
  10. This article introduces manufacturing methods of taurine by means of sodium hydroxyethyl sulfonate ammonolysis acidification. Optimization quadratic regress standard alternant design experimentation was adopted in high-pressure ammonolysis reaction process experimentation.
    研究了羟乙基磺酸钠氨解酸化法生产牛磺酸的工艺,对其中的高压氨解反应过程采用二次回归正交设计实验方法进行了优化。
  11. Manufacturing propanal and its derivatives by high-pressure oxo-process
    利用吉化高压羰基合成装置生产丙醛及其系列产品
  12. Stress Analysis and Calculation of High-temperature High-pressure Process Pipelines
    高温高压工艺管道应力分析计算
  13. But, during the use of naphthenic robber process oil, the common disadvantage of high-pressure hydrotreatment process has gradually emerged, that is, bad light& heat stability.
    但是环烷基橡胶油在使用过程中,逐渐暴露出高压加氢所共有的缺点:光、热稳定性差。
  14. The principle of liquid chlorine production and its process were introduced. The existing problems of units for liquefied chlorine by high-pressure liquefaction process were analysed, and the improvement were put forward.
    介绍了液氯生产的原理及工艺,分析了高压液化法生产液氯装置中存在的问题,并提出了改进措施。
  15. This paper described the powder coatings and the characteristics of the coatings equipments. By comparison, the low temperature curable acrylic powder coatings for bicycle finishing and high-pressure electrostatic sprayer are selected for manufacture process.
    介绍了粉末涂料及涂装设备的特点,通过比较选择了自行车罩光用的低温固化型丙烯酸粉末涂料及高压静电涂装设备,并将之应用于生产。
  16. The briquette strength is increased along with the feed coal particle size decreasing at the without binder and high-pressure briquetting process condition.
    无粘结剂高压成型时,随着煤的粒度的减小,型煤强度增大;
  17. The technology of impinging streams crushing is a novel technology for the preparation of ultra-fine particles. The ultra-fine particles whose distribution of the size is narrow can be prepared with supersonic wave interactions and high-pressure wallop created in the process of impinging streams impact.
    撞击流粉碎技术是一种新颖的超细颗粒制备技术,它利用了撞击流碰撞过程中产生的超声波及高压冲击力作用,可制备出粒度小且分布窄的超细颗粒。
  18. This paper explains how to determine stress-strain relation, dynamic yield stress and high-pressure state equation. and how to process the boundary condition and shockwave in solving equa-tions.
    对有关流体弹塑性方程求解的应力应变关系,动力屈服应力,高压状态方程确定,以及边界条件和波阵面处理进行了叙述。
  19. The determination of throttle coefficient of high-pressure natural gas in adiabatic throttle process is discussed, and the average throttle coefficient can be calculated by the enthalpy-pressure chart and equal enthalpy equation.
    讨论了高压天然气绝热节流过程中节流系数的确定。任意状态下的节流系数可利用计算式确定,平均节流系数可利用天然气的焓-压图和等焓计算式确定。
  20. A new high-temperature and high-pressure preheating gas process ( Regate process) is introduced in reforming section. Its effect is remarkable.
    在转化段引入一种新型高温高压气体预热工艺(里格特工艺),收效也很显著。
  21. So the objective of this thesis is to study the fuel high-pressure injection process of diesel engines with analytical, experimental and computational methods.
    本文基于理论分析、试验研究、三维数值模拟相结合的方法,对柴油机燃油高压喷射雾化过程进行分析研究。
  22. Eosin Y can be removed efficiently from aqueous solutions by Fenton's reagent. Sunlight and high-pressure mercy lamp can both enhance this process and sunlight has a better effect than the latter.
    Fenton反应可以有效地对呫吨染料曙红Y进行降解脱色,太阳光对曙红Y降解脱色的促进作用大于高压汞灯光源。
  23. The silicon thin films are easy to crystallize under high-pressure and high-power deposition process compared with conventional conditions.
    在高压高功率下沉积和常压常功率下沉积相比,高压高功率更有利于薄膜晶化;
  24. And a low loading coefficient is more favorite for high-pressure rotor in the counter-rotating elementary stage designing process.
    对转涡轮高压级基元设计应尽量选择较大载荷系数等观点和建议。
  25. The ore-forming fluid consists mainly of metamorphic fluid, recycled atmospheric water and high-temperature and high-pressure fluid from deep earth during the process of metamorphism-transformation.
    成矿流体主要为变质变形过程中产生的变质热流体、再循环大气水和地球深部的高温、高压流体。
  26. A propane refrigeration cycle process, combined with the existing gas field high-pressure throttling refrigeration treatment process, the transformation process of the low pressure gas propane refrigeration cycle, which provided technical support for the future design of the propane refrigeration system.
    研究了丙烷制冷循环工艺,结合现有的气田天然气高压节流制冷处理工艺流程,提出了低压气丙烷制冷循环的改造工艺,为今后丙烷制冷系统的设计提供了技术支撑。
  27. This method is feasible by comparing the simulation results with the experimental data, so it can be used to simulate the high-pressure combustion process of HAN-based liquid propellants.
    通过与实验结果进行对比,验证此法可行,能够用来模拟HAN基液体推进剂的高压燃烧过程。
  28. This paper mainly discussed the influence of high-pressure steaming process and drying process on the tremella quality.
    本论文主要探讨了高压蒸制工艺和干燥工艺对银耳品质的影响并优化了工艺参数。